ISO 10497 Standard specifies fire type-testing requirements and a fire type-test method for confirming the pressure-containing capability of a valve under pressure during and after the fire test. ...
API 624 standard specifies the requirements and acceptance criteria (100 ppmv) for fugitive emission type testing of rising stem valve and rising-rotating stem valves equipped with packing previously tested in accordance with API 622. ...
BS6364 Standard specifies the requirements for the design, manufacture and testing of valves for cryogenic service. It is a requirement of this standard that the valves comply with the appropriate valve. ...
The MSS SP-55, Quality Standard for Steel Castings for Valves, Flanges, Fittings, and Other Piping Components– Visual Method for Evaluation of Surface Irregularities ...
ISO 17292 Standard specifies the requirements for a series of metal ball valves suitable for petroleum, petrochemical, natural gas plants, and related industrial applications. ...
BS 6755 Part 2 specifies fire type-testing requirements and describes, in appendix A, the fire type-test method for confirming the pressure-containing capability of a valve under pressure during and after the fire test. ...
BS 6755 Part 1 specifies production pressure testing requirements and describes in appendix D tests to confirm the pressure containing capability of the shell of a valve under pressure. ...
BS 5351 Standard specifies the valve seat and body pressure/temperature ratings, and the design, including materials, dimensions, operation, performance, testing. ...
BS 5352 Standard specifies requirements for forged, cast or bar stock steel wedge gate, globe stop and check valves with flanged, screwed, socket-weld or butt-weld ends, in nominal sizes 50 mm (2 in) and smaller in classes 150, 300, 600, 800 and 1500 ...
BS 1873 Standard specifies requirements for cast or forged carbon and alloy steel outside screw and yoke globe valve and globe stop valve and check valves, straight pattern, angle pattern and (oblique) Y pattern, with flanged or butt-welding ends. ...
This part of ANSI/NACE MR01 75/ISO 1 51 56 describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural-gas sw ...
Petroleum, petrochemical and natural gas industries – Materials for use in H 2 S-containing environments in oil and gas production. ...
This International Standard ISO 5208 specifies examinations and tests that a valve manufacturer needs to act upon in order to establish the integrity of the pressure boundary of an industrial metallic valve and to verify the degree of valve closure t ...
ASME B1.20.1 Standard covers dimensions and gaging of pipe threads of the following series: NPT,NPSC, NPTR, NPSM and NPSL. ...
ASME B31.8 covers the design, fabrication, installation, inspection, and testing of pipeline facilities used for the transportation of gas. This Code also covers safety aspects of the operation and maintenance of those facilities ...
ASME B16.20 Standard covers materials, dimensions, tolerances, and markings for metal ring-joint gaskets, spiral-wound metal gaskets, metal-jacketed gaskets, and grooved metal gaskets with covering layers. ...
ASME B16.25 Standard covers the preparation of buttwelding ends of piping components to be joined into a piping system by welding. It includes requirements for welding bevels, for external and internal shaping of heavy-wall components, and for prepar ...
ASME B16.34 Standard applies to new construction and covers pressure–temperature ratings, dimensions, tolerances, materials, nondestructive examination requirements, testing, and marking for cast, forged. ...
ASME B16.11 Standard covers ratings, dimensions, tolerances, marking, and material requirements for forged fittings, both socket-welding and threaded. ...
ASME B16.10 Standard covers face-to-face and end-to-end dimensions of straightway valves, and center-to-face and center-to-end dimensions of angle valves. ...
ASME B16.47 Standard covers pressure–temperature ratings, materials, dimensions, tolerances, marking, and testing for pipe flanges in sizes NPS 26 through NPS 60. ...
ASME B16.5 Standard covers pressure–temperature ratings, materials, dimensions, tolerances, marking, testing, and methods of designating openings for pipe flanges and flanged fittings ...
API 6DSS specification defines the requirements for the design, manufacturing, quality control, assembly, testing, and documentation of ball, check, gate, plug, and axial on–off valves for application in subsea pipeline systems for the petroleum and ...
API 622 standard specifies the requirements for comparative testing of valve stem packing for process applications where fugitive emissions are a consideration. ...