BS Standard

BS6364 Standard specifies the requirements for the design, manufacture and testing of valves for cryogenic service. It is a requirement of this standard that the valves comply with the appropriate valve

BS 6364: Cryogenic Valves Specification

BS6364 Standard specifies the requirements for the design, manufacture and testing of valves for cryogenic service. It is a requirement of this standard that the valves comply with the appropriate valve. ...

BS 6755, Part 1, Specification for production pressure testing requirements

BS 6755 - Part 1: Pressure Testing of Valves

BS 6755 Part 1 specifies production pressure testing requirements and describes in appendix D tests to confirm the pressure containing capability of the shell of a valve under pressure. ...

BS 5352 Steel wedge gate, globe and check valves 50 mm and smaller

BS 5352: Steel wedge gate, globe and check valves 50 mm and smaller

BS 5352 Standard specifies requirements for forged, cast or bar stock steel wedge gate, globe stop and check valves with flanged, screwed, socket-weld or butt-weld ends, in nominal sizes 50 mm (2 in) and smaller in classes 150, 300, 600, 800 and 1500 ...

WhatsApp
8613634229454
Email
info@reliavalve.com
Phone
0086-577-86373155
Inquiry
TOP