A182 F60 Ball Valve

ASTM A182 F60 Ball Valve is made of ASTM A182 F60 (UNS S32205) that is a super duplex steel material.The ball valve body and trim are all made of ASTM A182 F60.

ASTM A182 F60 Ball Valve Specifications

Part Name Body/Bonnet Bolting Stem Ball Seat Spring
Material ASTM A182 F60 A193 B8M/A194 8M ASTM A182 F60 ASTM A182 F60 RPTFE, Devlon, PEEK, etc. Inconel 725

A182 F60 Chemical RequirementA 

ASTM UNS C Mn P S Si Ni Cr Mo Others
A182 F60 S32205 0.030 2.00 0.030 0.020 1.00 4.5–6.5 22.0–23.0 3.0–3.5 N 0.14–0.20

AAll values are maximum unless otherwise stated. Where ellipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.


A182 F60 Tensile and Hardness RequirementA

ASTM UNS Tensile Strength, min, ksi [MPa] Yield Strength, min, ksi [MPa]B Elongation in 2 in. [50 mm] or 4D, min, % Reduction of Area, min, % Brinell Hardness Number, HBW, unless
otherwise indicated
A182 F60 S32205 95 [655] 65 [450] 25 45 . . .

AWhere ellipses appear in this table, there is no requirement and the test for the value need neither be performed nor a value reported.

Leave Us Your Info

Could you please kindly fulfill the following information when enquiring:

Valve type (ball, gate, globe, check etc.), valve size, pressure class, valve material, and end connection (flanged, butt welding etc.)